Denim alteration. by Adrian Heathfield
Being able to wear near normal, albeit adapted, clothes is
important for patients. Here Adrian Heathfield explains how he
adapts jeans to wear over his frame.
You will need:
Pair of jeans or trousers
Piece of material
A zip that splits at the bottom
After you have split the seam make sure you can get the frame
through the gap before you start sewing.
You will probably need to split the jeans all the way up.
You will need to know how wide your jeans are. Measure the
jeans at the point where the top of the frame will be.
You can buy denim for about £4 per square metre which will be
enough to do about three or four pairs. It is better to use
lightweight denim as it makes sewing easier. whether you are
using a machine or sewing by hand.
Measure the frame at its widest point and add another Scm.
Measure the length of the frame and add 1ocm. It might seem
like common sense but don't forget the half pins stick out a
Mark the denim on the reverse in a long v using the two
measurements. When cutting make sure to cut outside the lines
as it is always better for them to be too big, than too small.
This piece of denim is now sewn to one of the jeans seams.
Hold the edge of your jeans and the piece of denim back to back
so the inside is showing on both sides.
Keeping the two edges in line, sew together.
Once done turn the jeans back and you shouldn’t be able to see
Then sew the zip to the back edge of both seams.
It should now look like this.
Cut a long V in the new fabric
Sew in zip
And if all this is too much like hard work or you don't have
Adrian’s sewing skills, you can get very useful zippable
tracksuit bottoms from Next (Canterbury Black Ugly Pants,
sizes S to XXL, and Canterbury Blue Ugly Pants for children.
sizes 8 to 14).